Become a member
Take advantage of exclusive member benefits, world class events, networking and specialist support
17 November 2026
Endoline Automation has repurposed Denroy’s case packing and palletising for hairbrushes, in place of the original application for facemasks.
Manufacturer of engineered polymer products and components Denroy is now using the end-of-line installation to supply sister company Denman, which is an internationally known hairbrush brand.
The equipment was originally installed during the Covid-19 pandemic, when Denroy began to manufacture FFP3 facemasks. Automation was a requirement, given the restrictions on manual labour at the time. The line consists of a fully automatic 221 case erector and 602 case taper, conveyor systems and integrated Endoline Robotics case loading and palletising.
“We recognised that the line would deliver significant operation efficiencies, and felt it would be better suited to our hairbrush line which would deliver long-term results,” says Denroy process engineer Steven McCord. “We discussed this with Endoline and they quickly adapted the line to meet our needs.”
After forming on the 221 erector, cases are conveyed to an Endoline Robotics Delta Robot where a cylinder pushes down into the case to facilitate packing. Each brush is manually sleeved before being placed into the open case by the robot in two rows of three.
The filled cases are then transported via a second conveyor to the 602 case sealer for closing and tape sealing, before moving down a roller conveyor to an Endoline Robotics palletising system, incorporating Montech’s Spider technology and a stretch wrapper.
The system packs a hairbrush every 2 seconds - a significant improvement on the 20 seconds previously recorded, marking a 90% increase in efficiency.
Two case sizes are supplied. Sales of Denman’s flagship D3 and D4 hairbrushes reach over 1.6 million every year and are sold globally.
01767 316422
www.endoline-automation.com