Wenglor Presents New Barcode Line Scanner

Wenglor’s new barcode line scanner sets new standards in reading one-dimensional codes. Thanks to its increased scanning area, the stationary scanner can be used even more flexibly – at manual workstations and in fully automated systems.

With the integrated CCD (charge-coupled device) line, the BLN series barcode line scanner sets itself apart in particular with its high reading performance.

The large scanning area is 20mm to 200mm or 30mm to 520mm, depending on the model. This greatly increases flexibility in system design and installation. The compact design (29mm x 60mm x 52mm) also enables installation in tight spaces such as complex intralogistics facilities.

The BLN scanner reliably reads 1D codes with a very high density of over 0.075mm in static and dynamic applications of up to 0.3 m/s with a scan rate of 510 scans/s. The decoded information is sent directly to the system via an integrated Ethernet or RS232 interface.

Visible red light helps to ensure that the code is optimally aligned in the scanning area when used in manual workstations. The successful decoding is then output directly to the operator via a green “Good Read” LED, the practical OLED display shows the information stored in the code.

In addition to the easy operating concept requiring no additional software, the smart sensor impresses with its robust housing design with IP67 degree of protection, which also makes it suitable for use in harsh industrial environments.

Highlights at a glance

• Large scanning area from 20mm to 200 mm or 30 to 520 mm
• Compact design for installation in space-restricted systems
• Ethernet and RS-232 interface
• Visible red light for easy alignment
• Green “Good Read” LED and OLED display to show the reading status

For more information on Wenglor.

Visit website